Skip to main content

Site Navigation

Your Account

Choose Language

Introduction

The beauty of the Beyond Adaptive Mounts is the ease of use. One feature that makes these mounts so easy to use is the original quick release. As usual if you ever have any questions regarding our product that aren't answered on our support site please contact us.

  1. Begin by getting familiar with terminology by reviewing the following component names.
    • Begin by getting familiar with terminology by reviewing the following component names.

    • Quick Release Plate

    • Quick Release Receiver

    • Release Lever

    • Locking Pin

    • Device Cradle

    • Make sure the quick release is ready to receive the cradle by opening the lever. It should be in the position shown.

    • Orient the cradle so the quick release plate aligns with the smaller tab towards the bottom of the receiver.

  2. Insert the smaller tab of the quick release plate (the piece attached to the cradle) into the lower portion of the quick release receiver. Rotate the top of the quick release plate back in to the quick release receiver until the release lever snaps closed.  You may have to wiggle the plate slightly to get the lever to close all the way.
    • Insert the smaller tab of the quick release plate (the piece attached to the cradle) into the lower portion of the quick release receiver.

    • Rotate the top of the quick release plate back in to the quick release receiver until the release lever snaps closed. You may have to wiggle the plate slightly to get the lever to close all the way.

  3. Secure the quick release by rotating the brass lock pin clockwise (as you are looking at the back of the cradle).
    • Secure the quick release by rotating the brass lock pin clockwise (as you are looking at the back of the cradle).

    • When the locking pin is in the lock position you will not be able to open the release lever.

    • To remove the cradle unlock the release lever by rotating the locking pin counterclockwise. Then release the cradle by opening the release lever.

    • Always remember to hold the device cradle when releasing the quick release to prevent accidental damage to the device or mounting arm.

Conclusion

For additional instructions please refer to subsequent How To guides. If you do not find what you are looking for please contact support@beyondadaptive.com.

Support

Member since: 06/19/2012

111 Reputation

20 Guides authored

Team

Camp365 Member of Camp365

Community

1 Member

20 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 637