Skip to main content

Site Navigation

Your Account

Choose Language

Introduction

Specifications:

The UB002 Quick-Action Clamp supports up to 33lbs (15kg) and fits objects from 0.5in - 2in (13mm -55mm).

  1. First familiarize yourself with the terminology of the Beyond Adaptive UB002 Quick-Action Clamp.
    • First familiarize yourself with the terminology of the Beyond Adaptive UB002 Quick-Action Clamp.

    • Clamp Adjustment Knob

    • Clamp Removal Knob

    • Clamp Removal Button

    • Wedge Insert

    • Arm Receiver

    • Quick-Action Release Button (not pictured)

  2. The Wedge Insert is used when the clamp will be attached to flat surfaces such as the edge of a desk, table, or square tubing up to approximately 1 inch. To use the Wedge Insert first remove the wedge from its storage position on the Clamp Removal Knob. Next place the wedge in the v-notch of the clamp opening making sure to push it firmly into place.
    • The Wedge Insert is used when the clamp will be attached to flat surfaces such as the edge of a desk, table, or square tubing up to approximately 1 inch.

    • To use the Wedge Insert first remove the wedge from its storage position on the Clamp Removal Knob.

    • Next place the wedge in the v-notch of the clamp opening making sure to push it firmly into place.

  3. To remove the UB002 Quick-Action Clamp for a Beyond Adaptive Mounting Arm begin by loosening the Clamp Removal Knob. Next press the Clamp Removal Button and pull the arm post out of the Arm Receiver. To reattach the Quick-Action Clamp to a Beyond Adaptive Mounting Arm simply reverse these steps.
    • To remove the UB002 Quick-Action Clamp for a Beyond Adaptive Mounting Arm begin by loosening the Clamp Removal Knob.

    • Next press the Clamp Removal Button and pull the arm post out of the Arm Receiver.

    • To reattach the Quick-Action Clamp to a Beyond Adaptive Mounting Arm simply reverse these steps.

    • When reinserting the arm make sure to align the flat surface of the arm post with the Clamp Removal Knob so the screw tightens against that surface.

    • Clamp removal knob must be kept tightened to avoid damage to arm post

  4. To attach the clamp to a round tube the Wedge Insert should be in its storage position on the Clamp Removal Knob.  The v-notch on the clamp opening helps the clamp secure firmly to round or oval tubes or other objects as well as larger flat surfaces. Place the opening of the clamp over the object you wish to clamp it to. Use the "Quick-Action" feature of the clamp by pressing the Clamp Adjustment Knob toward the tube or object you are clamping onto.
    • To attach the clamp to a round tube the Wedge Insert should be in its storage position on the Clamp Removal Knob. The v-notch on the clamp opening helps the clamp secure firmly to round or oval tubes or other objects as well as larger flat surfaces.

    • Place the opening of the clamp over the object you wish to clamp it to.

    • Use the "Quick-Action" feature of the clamp by pressing the Clamp Adjustment Knob toward the tube or object you are clamping onto.

    • Finish tightening the Quick-Action Clamp by turning the Clamp Adjustment Knob clockwise until firmly secured.

  5. To attach the clamp to a flat or square object the Wedge Insert should be placed in the v-groove. Position the clamp over the object you wish to secure it to. Begin tightening the clamp by pressing the Clamp Adjustment Knob towards the object you are clamping onto.
    • To attach the clamp to a flat or square object the Wedge Insert should be placed in the v-groove.

    • Position the clamp over the object you wish to secure it to.

    • Begin tightening the clamp by pressing the Clamp Adjustment Knob towards the object you are clamping onto.

    • Finish tightening by turning the Clamp Adjusting Knob clockwise until the clamp is securely fixed the the surface.

  6. Removing the Quick-Action Clamp is fast an easy! First, turn the Clamp Adjusting Knob counterclockwise to initally loosen. Next, push the Quick-Action Release Button and the jaws of the clamp will open completely making removal quick and easy.
    • Removing the Quick-Action Clamp is fast an easy!

    • First, turn the Clamp Adjusting Knob counterclockwise to initally loosen.

    • Next, push the Quick-Action Release Button and the jaws of the clamp will open completely making removal quick and easy.

Finish Line

Support

Member since: 06/19/2012

111 Reputation

20 Guides authored

Team

Camp365 Member of Camp365

Community

1 Member

20 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 740