Skip to main content

Site Navigation

Your Account

Choose Language

Introduction

Specifications:

The B001 Standard Base Clamp supports up to 33lbs (15kg) and fits objects from 0.5in - 2in (13mm -55mm).

  1. First familiarize yourself with the terminology of the Beyond Adaptive UB001 Standard Base Clamp.
    • First familiarize yourself with the terminology of the Beyond Adaptive UB001 Standard Base Clamp.

    • Clamp Adjustment Knob

    • Clamp Removal Knob

    • Clamp Removal Button

    • Wedge Insert

    • Arm Reciever

  2. The Wedge Insert is used when the clamp will be attached to flat surfaces such as the edge of a desk, table, or square tubing. To use the Wedge Insert first remove the wedge from its storage position on the Clamp Removal Knob. Next place the wedge in the v-notch of the clamp opening making sure to push it firmly into place.
    • The Wedge Insert is used when the clamp will be attached to flat surfaces such as the edge of a desk, table, or square tubing.

    • To use the Wedge Insert first remove the wedge from its storage position on the Clamp Removal Knob.

    • Next place the wedge in the v-notch of the clamp opening making sure to push it firmly into place.

  3. To remove the UB001 Standard Base Clamp for a Beyond Adaptive Mounting Arm begin by loosening the Clamp Removal Knob. Next press the Clamp Removal Button and pull the arm post out of the Arm Receiver. To reattach the Standard Base Clamp to a Beyond Adaptive Mounting Arm simply reverse these steps.
    • To remove the UB001 Standard Base Clamp for a Beyond Adaptive Mounting Arm begin by loosening the Clamp Removal Knob.

    • Next press the Clamp Removal Button and pull the arm post out of the Arm Receiver.

    • To reattach the Standard Base Clamp to a Beyond Adaptive Mounting Arm simply reverse these steps.

    • When reinserting the arm make sure to align the flat surface of the arm post with the Clamp Removal Knob so the screw tightens against that surface.

  4. To attach the clamp to a round tube the Wedge Insert should be in its storage position on the Clamp Removal Knob.  The v-notch on the clamp opening helps the clamp secure firmly to round or oval tubes or other objects as well as larger flat surfaces. Place the opening of the clamp over the object you wish to clamp it to. Tighten clamp by turning the Clamp Adjustment Knob clockwise until firmly secured.
    • To attach the clamp to a round tube the Wedge Insert should be in its storage position on the Clamp Removal Knob. The v-notch on the clamp opening helps the clamp secure firmly to round or oval tubes or other objects as well as larger flat surfaces.

    • Place the opening of the clamp over the object you wish to clamp it to.

    • Tighten clamp by turning the Clamp Adjustment Knob clockwise until firmly secured.

  5. To attach the clamp to a flat or square object the Wedge Insert should be placed in the v-groove. Position the clamp over the object you wish to secure it to. Tighten the Clamp Adjusting Knob clockwise until the clamp is securely fixed the the surface.
    • To attach the clamp to a flat or square object the Wedge Insert should be placed in the v-groove.

    • Position the clamp over the object you wish to secure it to.

    • Tighten the Clamp Adjusting Knob clockwise until the clamp is securely fixed the the surface.

    • Clamp removal knob must be kept tightened to avoid damage to arm post

Finish Line

Support

Member since: 06/19/2012

111 Reputation

20 Guides authored

Team

Camp365 Member of Camp365

Community

1 Member

20 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 691